AirFit F10 for Her
Superior comfort
- The AirFit™ F10's sleek, lightweight design gives patients a clear line of sight so they can read, watch TV or even wear glasses while wearing the mask. In fact, 75% of patients found the AirFit F10 to be more comfortable than their current ResMed traditional full face mask.*
Proven performance
- The dual-wall Spring Air™ cushion provides a secure seal for better performance. When asked about the AirFit F10's seal and stability, the majority of patients we spoke to told us that it outperformed their ResMed traditional full face mask.*
Ease of use
- The mask's four-part design makes it easy for you to demonstrate and for patients to take apart, clean and reassemble. Its intuitive design seamlessly integrates into your patient's bedtime routine.
* ResMed internal study of existing ResMed patients, conducted between July 25 and September 4, 2013, comparing their ResMed traditional full face mask with the AirFit F10.
- Remove the elbow from the mask by pressing the side buttons and pulling it out.
- Take off the lower headgear straps and hold the cushion to the face. Align the bottom with the crease of the chin and the top with the corner of the eye.
- Then pull the headgear over the head.
- Undo the fastening tabs on the upper headgear straps.
- Adjust both straps evenly until the mask feels stable, then reattach the tabs.
- Bring the lower straps below the ears and loop the headgear into the lower hooks on each side of the frame.
- Adjust the lower headgear straps evenly until the mask feels stable.
- The fitting should be firm yet comfortable. Do not overtighten.
- Connect the device air tubing to the elbow, then attach the elbow to the mask by pressing in the side buttons. Then push it into the mask.
- Turn on the device so it blows air.
- The patient now lies down to make any final adjustments if required.
- Undo the tabs on the upper headgear straps.
- Reposition both straps evenly, only enough so a seal is achieved, then reattach the tabs.
- The mask is now ready to use.
- Optional soft sleeves may be assembled for even more comfort on the cheeks.
| Complete mask system | |
|---|---|
| X-Small | 63139 |
| Includes frame, X-Small cushion, elbow with swivel, and Small pink headgear | |
| Small | 63140 |
| Includes frame, Small cushion, elbow with swivel, and Small pink headgear | |
| Medium | 63141 |
| Includes frame, Medium cushion, elbow with swivel, and Small pink headgear | |
| Headgear | |
| Small | 63167 |
| Frame system | |
| Includes frame, cushion, and elbow with swivel | |
| X-Small | 63160 |
| Small | 63161 |
| Medium | 63162 |
| Cushion | |
| X-Small | 62736 |
| Small | 62737 |
| Medium | 62738 |
Disassembly
Assembly
